Directions For 30 Seconds Outdoor Cleaner®
Concentrate Formula:
Mix 1 part 30 SECONDS Outdoor Cleaner with 1 part water. For example: Mix 1 gallon of cleaner with 1 gallon of water.
Ready To Use Formula:
No mixing required. This product is ready to go.
Directions:
- Apply 30 SECONDS Outdoor Cleaner when the surface is DRY.
- Keep surface wet with the product according to the label. The saturation time will vary depending on the amount of build up, and the porosity of the surface.
For example:
Concrete, Masonry, Tile, Asphalt – these are very porous so they require the most saturation:
- Spray on DRY surface.
- Keep wet with the product for up to 15 minutes.
- Hose off thoroughly with water.
Wood – this is slightly porous so it requires more saturation than vinyl siding:
- Spray on DRY surface.
- Keep wet with the product for up to 5 minutes.
- Brush or sweep the surface with the grain (if necessary).
- Hose off thoroughly with water.
Metal, Cloth, Paint, Plastic, Fiberglass:
- Test any cloth material on a small inconspicuous area first to make sure it is colorfast material.
- Spray on DRY surface.
- Keep wet with the product for up to 3 minutes.
- Brush (if necessary) and rinse thoroughly with water, within 10 minutes.
- It’s optional to brush the surface if necessary, to loosen stubborn build up.
- Re-application, prior to rinsing, may be necessary where heavy build up occurs.
- Rinse thoroughly with water, using a garden hose. The cleaning action stops when your surface dries.
- After use, clean applicator thoroughly with water.
- Store in a cool, dry place.
Helpful Hints:
- Always test on an inconspicuous area first, on surfaces that are susceptible to corrosion, dulling and bleaching. For example: fabric, color paving, high gloss paint and untreated metals.
- Wear protective clothing and footwear. 30 SECONDS Outdoor Cleaner will bleach out your clothes.
- Rinse from plants and metals within 10 minutes of application.
- Once you are familiar with how well 30 SECONDS Outdoor Cleaner works, it can be diluted up to 4 times more. Then you keep the surface wet, 4 times as long. Refer to the label directions for more information.