Directions For 30 Seconds Outdoor Multi Surface Cleaner®

Mix 1 part 30 SECONDS Outdoor Multi Surface Cleaner with 1 part water. For example: Mix 1 gallon of cleaner with 1 gallon of water.

Directions:

Apply 30 SECONDS Outdoor Multi Surface Cleaner when the surface is DRY. Keep surface wet with the product for at least 30 seconds. The saturation time will vary depending on surface and amount of staining.

For example:

Concrete, Masonry, Tile, Asphalt:

  • Spray on DRY surface.
  • Keep wet with the product for up to 15 minutes.
  • Brush (if necessary)
  • Hose off thoroughly with water.

Wood:

  • Spray on DRY surface.
  • Keep wet with the product for up to 5 minutes.
  • Brush surface with the grain.
  • Hose off thoroughly with spray nozzle.

Stained Wood:

  • Stain can be removed during cleaning, leaving a blotchy appearance, which can be remedied by re-staining. (See Helpful Hints below)

Metal, Cloth, Paint, Plastic, Fiberglass:

  • Spray on DRY surface.
  • Keep wet with the product for up to 3 minutes.
  • Brush (if necessary) and rinse thoroughly with water, within 10 minutes.
  • Do not use on copper

Helpful Hints:

  • Always test on an inconspicuous area first, on surfaces that are susceptible to corrosion, dulling and bleaching. For example: fabric, color paving, high gloss paint and untreated metals.
  • Wear protective clothing and footwear to prevent bleaching to regular clothing.
  • Rinse from plants and metals within 10 minutes of application.
  • Refer to the label directions for more information.
  • After use, clean applicator thoroughly with water.
  • Store in a cool, dry place.
Back To FAQ